Adjustable 65dB (Cellular / PCS / ATT 4G) | Ideal for residential and home office up to 6,000 sq.ft.
For all carriers in the U.S. and Canada (Not for Nextel iDEN)
Features:
- Tri-Band 800 (Cellular), 1900 (PCS), 700 (ATT 4G) Adjustable Dials for All Bands
- Works with 2G, 3G and ATT 4G standards
- Supports multiple cell phone devices simultaneously
- Oscillation Detection and Automatically Gain Control
- Operates at low temperature with Metal casing for durability
- Free 2-year manufacturer warranty included.
Tri-Flex-A Kit is designed for ATT 4G data users. It includes outdoor and indoor antennas and cables.
It is one of the Enhance series power repeaters for residential and small business usage. It is a Tri-Band (3-band)
repeater covering Cellular, PCS and ATT 4G 4G Band. It also covers all 2G, 3G, Voice, and ATT 4G
technologies, including 4G, HSPA(+).
Package includes:
- Tri-Flex-A 65dB adjustable power repeater amplifier with AC power supply
- CM288W wide-band outside outdoor antenna
- CM222W wide-band inside indoor omni dome antenna
- 30-Ft. CM400 / LMR-400 Low Loss Cable for Inside Antenna
- 75-Ft. CM400 / LMR-400 Low Loss Cable for Outside Antenna
- Velcro and screw mounting kit
- User Manual
Optionally, you can buy CM_LP Lightning Protector
and 2-FT LMR-400 Jumper Cable to protect your investment from lightning damage.
Note:
The indoor antenna and outdoor antenna must be apart for certain distance in order to achieve
the maximum gain without interference. The metal materials in building may lower the distance requirement.
Use the adjustable dials to adjust the amplifier for shorter distance between the indoor and outdoor antennas.
Specifications:
Frequency Range (MHz) |
Uplink: 824-849/1850-1910/698-716 MHz Downlink: 869-894/1930-1990/728-746 MHz |
Supported Standards | 4G, HSPA+, CDMA / WCDMA, GSM, EDGE, TDMA, AMP and all standard 2G, 3G, ATT 4G networks |
Average Gain Maximum Gain | 65dBi 70dBi |
Maximum RF Output Power | 3 Watts EIRP Cellular, 2W Eirp for PCS, 3W EIRP for 4G |
Noise figure | 7-dB |
AC Power Adapter | Input: 110V AC; Output: 6V/12V DC |
VSWR | Less than 2:0 |
Power consumption | less than 30-W |
Connecting Cables | LMR400 or CM400 recommended |
RF Connector | N Female connector on both ends |
Dimensions: | 8.5 x 6.25 x 1.5-Inch |
TriFlex-A-KIT Tri-Band Wireless Power Repeater KIT for 2G, 3G and ATT 4G
works with all major wireless network carriers in the U.S. and Canada (Not for Nextel iDEN, WiMax)
For 800/850 MHz and 1900 MHz in CDMA, WCDMA, GSM, TDMA, GPRS, PCS, AMPS, EDGE, 2G, 3G and ATT 4G.
U.S. wireless carriers: AT&T Wireless
|